temperature reduction
英 [ˈtemprətʃə(r) rɪˈdʌkʃn]
美 [ˈtemprətʃər rɪˈdʌkʃn]
网络 温度还原
英英释义
noun
双语例句
- Combined with phase change coating and other functional coating, thermal infrared phase changed& temperature reduction composite stealthy coating was prepared, which reduced the difficulty of individual application the phase change materials to thermal infrared stealthy, and the performance of every coatings were tested.
将相变涂料与其他功能涂层结合，制备出热红外相变&降温复合隐身涂层，降低了单独将相变材料应用于热红外隐身的难度，并对各涂层的性能进行了测试。 - The constant volumetric delivery and melt temperature reduction bring a significant improvement in the quality of the end product.
稳定的体积流量和降低熔体温度对于改善最终产品的质量有重要意义。 - This paper expounds the internal connection and regularity among sintering technological conditions, microscopic structures of sinter and degradation during low temperature reduction.
本文阐明了烧结工艺条件、烧结矿微观组织结构与烧结矿低温还原粉化的内在联系和规律。 - According to the principle, this article examines relative process used in gas gathering station using initial pressure energy of natural gas for throttling temperature reduction and gives a calculation method of injection volume of methanol to inhibit formation of hydrate during throttling temperature reduction.
本文运用这一原理，研究利用天然气原始压力能，实现节流降温在集气站所采用的工艺流程，给出了在节流降温过程中，不形成水化物所需的甲醇注入量的计算方法。 - A Discussion on Analytical Method of the Characteristics of Temperature Reduction by Air Condition System in Cab
机车司机室空调系统降温特性分析方法探讨 - For the non-isothermal crystallization, the crystallization rate was increased while speeding up the temperature reduction; according to Avrami equation and Ozawa equation, the ratio of Avrami index and Ozawa index was calculated as 1.31-1.49, the activation energy-87.96 kJ/ mol.
在非等温结晶过程中，结晶速率随降温速率的增大而提高，综合利用Avrami方程和Ozawa方程得到Avrami指数与Ozawa指数的比值为1.31～1.49，非等温结晶活化能为-87.96kJ/mol。 - The problems existed and results achieved during the trial-production were summarized. Some aspects such as temperature reduction, splashing, air-oxygen ratio and treatment efficiency in the course of operation have been initially studied.
总结了试生产中存在的问题和取得的结果，对工艺操作中的温降、喷溅、气氧比和处理效率等问题作了初步探讨。 - Ensure the temperature reduction fans on the rear of the ultrasonic cabinet as well as on the both ends of the transducer work properly.
超音波箱体后端降温风扇应正常运转，振动子两端风扇应正常运转。 - Test on molybdenum powder without low temperature transition and high temperature reduction
无低温过渡高温还原钼粉试验研究 - Because of high temperature reduction is the traditional synthesis method, and the characteristics of the materials were impacted by synthetic temperature, calcining time, the content of carbon additives, impurities.
因采用的是高温还原传统的合成方法，材料的特性受到合成温度，煅烧时间，碳添加剂的含量，杂质等因素的影响。